You'll need an 1 1/4" wrench ,not a socket and ratchet, to get to the banjo nut on the back of the pump. Not everyone has a wrench that big in the set. Other than that regular tools will get it done. I would do those orings on the fuel bowl while in there but doubt you would get them by friday. There are 2 copper washers on that banjo nut, be sure their back on when you tighten it back up. Also I got our pumps from oreilly's and they were alot cheaper than our napa. Same carter pump and everything. Napa was $125. Oreillys was 100. Sounds like your napa is better than mine.http://images.ford-trucks.com/forums...s2/cussing.gif