Thread
:
Proper Fitting Brake Line to Master Cylinder Port?
View Single Post
#
5
10-25-2009, 02:36 PM
Ford_Six
Hotshot
Join Date: Oct 2002
Location: The Big, Oregon
Posts: 18,488
Likes: 0
Received 19 Likes on
15 Posts
Ford dealt with these fittings in two ways: One was a very large nut with a small bore for the 3/16" line, the other was an adapter fitting. It is a 3/16" line from the factory either way.
Reply
Like
Ford_Six
View Public Profile
Find all posts by Ford_Six