help with first batch
Did my first batch the other day and got about 4% unreacted with the methanol test.
Did my second batch last night and got about 2% unreacted.
So I have been doing more reading and I think my KOH base might be too low, getting conflicting #'s
The recipe I was following suggested 5.0 base + titration. The oil I am using titrates very low @ 2.0
25% methanol
This is a 4 gallon batch, with paint stir agitation processed for 60 minutes kept between 120-135F.
First batch I used 7.0/liter.
Second batch I used 8.0/liter.
So I have read more and find some other #'s for base using koh. I see 7.0 and 9.0/liter.
Looking for complete reaction, but not too much soap(read, easy wash)
Any advice appreciated.