Thread: ECM Part Number
View Single Post
  #4  
Old 09-01-2009, 09:52 PM
aldridgec's Avatar
aldridgec
aldridgec is offline
Logistics Pro
Join Date: Mar 2002
Location: Wake Forest, NC
Posts: 3,849
Received 76 Likes on 61 Posts
Nope, not on a superduty. On the firewall by the drivers fender undo the nut in the center of the electrical connector for the ecm. Under the dash, there will be a plastic case around the ecm. Undo two small screws that hold that in and remove the pcm from under the dash.