To Subford,

I checked all the following, and I think I need to change the EEC. All checked as indicated and I still do not have power to the fuel pumps.

If:
1. The Red wire has power.
2. The noid light is not flashing while cranking.
3. With a good ground at pins 40 & 60 of the computer.
4. An you have good power at pins 1, 37 & 57 of the computer.
5. You have good spark.
6. Cranks and fires on starter spray but won't run.

I am going to try the EEC route and let you know.

aland