View Single Post
  #5  
Old 08-19-2009, 07:31 AM
skattnig's Avatar
skattnig
skattnig is offline
Freshman User
Join Date: Jan 2007
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
I have power at the ignition switch. Tried two different ones just to make sure.

I have power at the duraspark box. Just nothing past it. But the new box didnt fix it either.

When i redid the wiring it was the buttons that mount on the door frame down by the kick panels that operate the courtesy lamps and dome light when the doors were open, also the courtesy lamp wires themselves. I don't remember all the wire colors but i do remember one was bright green with a yellow strip. But it just ran from the fuse block to the courtesy lamps. Never to any other wires.

would a msd box fix this? I was planning on upgrading to msd eventually, this is a slow build show truck. Finally have most of the pieces i need to finish it. I was looking at the msd digital 6. I just dont know if it is a replacement or if it still uses the duraspark.

I like the duraspark, especially the low oil pressure cut off feature (saved my motor when it was blowing up rockers) but i just cant seem to get it fixed.