I cleaned grounds, took off old splices and still nothing. Then I decided to take a 3,4,5 look at the fuse panel. I pulled the one out for emergency/tail lights. I found that the fuse was not blown but was only 14amp fuse. It calls for a 20amp, I used a piece of foil to bypass the fuse. IT WORKED, I went to the parts store picked up some fuses and changed them out. All I can figure is that the lower amp fuse was not letting enough juice thru. I never would of thought of that but wierder things have happened.

My only thing left is the backup lights.... is this part of the neutral safety switch?