Originally Posted by
4caster
I have a 1986 F150 XLT Lariat. (At least that is what the shiny badge says...)
Question 1 - Has anyone had any experience with LNC upper door panels? My OEM panels are quite chalky after 23 years in the Texas heat.
Question 2 - It appears that the missing headliner material was glued to the inner metal roof? (There is foam and glue residue on the metal panel over my head.) Was gluing the fabric to the metal inner roof the norm, or was this a "modification" made by a PO? What would be my best stategy for gluing on new fabric? I thought that most headliners backers were removable fiber board.
LMC has quality products
The headliner did have a cardboard liner w a faom backin then a piece of fabric glued to that. It Should not of ben glued to the steel headliner. The trim around the roof holds it up