Are E7TE PA heads good for strokers?
dude, you're consuming WAY too much methamphetamine if you think E6 heads will EVER make more power than E7's!!! LOL!
you can control compression with which pistons you decide on...
I'm still reeling that you would suggest the E6's!! LMAO!!!
seriously, on a 302, the E6's run out of steam at about 4500rpm... on a 347 it would be more like 4000rpm... the valves are shrouded like nobody's business...
that's not to say that the E7's are all that great... like I said, you would be better off w/ a pair of TFS twisted wedges or some AFR 165's (or some Dart Jr's!! LOL!) on a 302 than you would w/ some E7's on a 347... doesn't matter if it's automatic, standard or what...
zero deck is nice, but I would bring the piston out of the hole .010" and use a standard gasket... quench is a good thing... E6 heads are NOT!! LMGDAO!!!!!!!
Forrest