Originally Posted by
goodB0Y
like I said cab mounts are the nastiest thing to do on our trucks... I've read of people burning then off... cutting then out... drilling them out... grinding them.... honestly the trick I posted is by far the best way and makes the whole job a breeze...
the reason there so difficult to remove is ford pinched the sleeves together and since the frame flange is between the two parts you cant get them out. add a bit of rust and it's impossible. Unless you use the GoodBOY super top secret cab mount removal procedure...LMAO
Its tough to understand your method I guess without just getting into the job. What nut do you refer to that you put the socket on? If you remove the bolt through the cab mount, wont the nut be gone too?