No link but some useful info. PM me your email and I will send pics.
7.3 Ford Diesel water pump change information
<o></o>
Water Pump used<o></o>
<o></o>
Autozone DWP-9128 UPC 6 11176 00692 7<o></o>
<o></o>
Bolts on thermostat 6MM 1MM pitch about 25 mm long Hardened. Note they have locktite hit head with
Hammer to break seal before attempting to remove or bolts will break
<o></o>
O Ring seal needed on bottom pump extension. O ring seal used on thermostat top housing
<o></o>
Wrench for Fan is 1 7/8 “ or 48 MM
Wrench for holding pulley is 54 MM. Must use both wrenches to remove fan. This is the most difficult
part of the pump change OEM part # 27141,, but not Ford OEM is the brand name.

Replace all hoses, belts, and check idler/tensioner pulleys,thermostat