Thread
:
Removing clutch slave cylinder
View Single Post
#
5
04-10-2009, 08:19 AM
fellro86
Hotshot
Join Date: Feb 2004
Location: Marengo, Iowa
Posts: 11,697
Likes: 0
Received 2 Likes on
2 Posts
Yes, it basically slides out, just lift the retaining clip enough to slide it out, it really is that simple. The pushrod is held in by pressure into the dimple on the fork. The only thing holding the slave in place is that springy metal clip.
Reply
Like
fellro86
View Public Profile
Find all posts by fellro86