View Single Post
  #73  
Old 04-05-2009, 03:07 AM
Econoline 150's Avatar
Econoline 150 Econoline 150 is offline
Elder User
 
Join Date: Oct 2007
Posts: 561
Econoline 150 is starting off with a positive reputation.
Quote:
Originally Posted by 385seriesHemi View Post
The 332 displacement was used in 1961 - 1963 truck apps also but nothing else after or between '59 & '61. Well at least Mr Chiltons says so.Here are some CIDs that I did not see you guys posting about - 605 GMC, 461 international. I dont know if it was mentioned, but the 427 truck engines from Chevy have a recess in the cylinder at the top to lower the compression ratio unlike 427 car engines which do not.
Gmc had a 637 V8. The International 461 was a smaller bore V549. They also had a V401, but the RD-450s and RD-501 International 6 cylinder gassers were far better. Even bigger was Macks 707 6 cylinder gasser, which was a flathead if I remember correctly.
__________________
Bill Lloyd

1981 Ford F250 4 x 4 351M 4 speed
1993 Aerostar 3.0 V6 5 speed
Reply With Quote