You'll have to excuse the picture quality.. it's a digital picture of a print picture. This is the homemade ramp the PO of my truck built for his snowmobile, I have used it for a sled as well as bikes, took a trip to the east coast a couple years ago and had 2 street bikes on the truck, a Honda 599 and Kawasaki ZX11. The ramp is the length of the bed.. 80" in this case, so a small bank or hill is required to get faired bikes in or out without damage. There is a portion built with C channel that bolts into the bed, it has a plywood deck, and the ramp portion that slides out from underneath it and clips on. Both parts have small box steel frame under the wooden deck. The tailgate is removed when using the ramp, I just take it off and leave it home, but the whole thing will fit inside the bed with the gate closed.