View Single Post
  #4  
Old 03-10-2009, 10:23 AM
Smokin''s Avatar
Smokin'
Smokin' is offline
Smokin
Join Date: Jun 2006
Posts: 8,849
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Polkster
Replacing water pump on 2000 f450 7.3L diesel. I have pump in hand, new airtex from northern auto parts.
1) Should put new thermostat in while i'm in there? What brand and temperature range?
Heavy bucket truck hauling heavy equiptment and sits idiling long periods of time while working boom that runs off pump from engine.

2) Is there water pump replacement link somewhere on site?
Have seen repair videos on you tube before, lost that link, hopefully
someone can direct me to it.
Thanks in advance folks, the people on this site are always so helpful.
Here's a utube link. I found this particularly helpful.

YouTube - Water Pump RnR

I replaced mine with the very same airtex from Northern. I also replaced my thermostat with the 203* and went ahead and purchased the billet housing. The billet housings are nice because the ford factory stamped metal parts are pretty cheesy.