Originally Posted by Sandidande
Ok here are a couple of great schematics. I'm not sure if you will be able to read them once they are posted but if not send me a PM with your e-mail address and I will send you the fullsize versions.
The question is: How long are the F1 and F3 fenders....are they the same or is one longer. I measured my F1 fenders and from running board to back edge on the bed side mounting edge, they are: 58 1/2" If you can get one of the guys with an F2 or F3 with the long bed to measure their fenders (under the bed from inside edge at the running board to back lip at the bed) that will tell you which of the two sets of fenders you have enough room to mount lengthwise. Remember each F2/F3 back fender is narrower that the F1 fenders by 2 1/2 inches.
You can see also how far back your tailgate should be from th ewheel center in these.
My name is Daniel, and live in Brazil. I have a 1951 Ford F5 inrestoration.I love the pick up Ford's, especially those of 48-52 yearsI ask your help, if possible.the forum found the measures of the ford pickup 48-51, but the picture is small and I ask if Mr. has this image infull size? send to my e-mail: firstname.lastname@example.orgThanks