I spliced in from another power line some metal 30 amp fuse or relay over by the fuse box. It comes right from the box. Then I spliced it into the brown wire with the male pig tail that looked to be the power line in the connection that pluges into the heater switch.

That worked. It is great.

But...

Now when I turn the car off the fan still runs until I turn the control selector on the heater/ac control panel to off.

That is wierd.

It must be some other bad connections or that 30 amp fuse I tapped into is power all the time???

I'll figure it out over time.

Again, thanks.