Thread: How to test IPR?
View Single Post
  #14  
Old 12-08-2008, 11:08 AM
brickie's Avatar
brickie
brickie is offline
Cargo Master
Join Date: Mar 2007
Location: AB/BC
Posts: 3,103
Received 27 Likes on 24 Posts
The leak (very small) is the pump its self and yes you have to close the IPR to test the system.If you have a parts store near by take the ICP sensor and get a male quick coupler to go in the icp port, that will be the fastest way to pressurize the system.
 
Reply Like