View Single Post
  #3  
Old 11-12-2008, 10:15 AM
nytling92's Avatar
nytling92
nytling92 is offline
Tuned
Join Date: Jan 2001
Location: Elizabethtown, Ky.
Posts: 352
Likes: 0
Received 5 Likes on 3 Posts
Bill, just for you, the only pic I have with the Nite on it, I removed the side stripes when I lowered it, of course that is long gone now...and there is still the one on the dash. As far as details...where do I begin?... It is all stock right now, 302 AODE, 42000 original miles, stock rearend, and so on...In 2001 I bought a crate 5.4 Linghtning(92 nite+Linghtning motor=nytling92) motor, blower to oilpan, a gear vendor overdrive for a C-4, a C-4 to mod motor bellhousing, and I was just going to beef up the stock rear, and that was the plan but.... then I got 2 effies and I thought it would be easier to put it in one of them.... Here lately I have been rethinking my plans. I've really started thinking about putting the 03-06 crown vic front end under the truck so I can have the ford car wheel bolt pattern, plus these have the mod motor mounts already a part of them. I guess that is all I have for now.