My 1988 F-150's lock cylinder has broken... so I can't turn the ignition ON to remove it. The previous posts said to drill out the access hole, but I can't find a diagram to show where. I have the steering wheel off already but don't want to drill the wrong thing! The very tip of the cylinder broke off inside the housing and the center of lock cylinder came out, leaving only the larger piece of the cylinder in place. What a mess.......
I tried the website listed as well, but it's not a good link. And the Chilton website now charges to look at anything, unless I haven't looked in the right spot. So if someone can show me a diagram and point out what to drill or tell me what else to try, I'd really appreciate it!!!
Michael