Thread: Fuel line specs needed for WVO conversion
View Single Post
  #2  
Old 06-11-2008, 05:51 PM
akghound's Avatar
akghound
akghound is offline
Junior User
Join Date: Mar 2008
Location: Montana City, Montana
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
You need to study
Originally Posted by parkland
specs on fuel supply to the heads...
<!-- / icon and title --><!-- message --><TABLE width="100%" border=0><TBODY><TR><TD vAlign=top>


I'm creating a complete second fuel system using a hydraulic pump for the WVO.
Now, I need to "Tee" into the existing fuel supply to the heads, what thread and size are they?
Also, I want to install a drain valve on each head, (where the fuel return was on buses etc), what size is that plug???
Thanks in advance.

</TD><TD></TD><TD vAlign=top height="100%">



</TD></TR></TBODY></TABLE><!-- / message --><!-- sig -->__________________
Not meaning to offend you, but:
Judging by your post I would say you haven't studied the WVO conversion idea very much. I guess you could "Tee" into the lines, "Drain" the return and such but there are better ways to do this. Check out how the VegiStroke is plumbed od look at the Frybrid information and you will have a much better idea on how to do this. Frybrid Vegetable Oil Fuel Systems and Dino Fuel Alternatives: Vegetable Oil Fuel Systems

Ken Gardner
 
Reply Like