#13  
Old 06-05-2008, 04:43 AM
lgeiger13's Avatar
lgeiger13
lgeiger13 is offline
New User
Join Date: Jan 2007
Posts: 5
Likes: 0
Received 1 Like on 1 Post
help you

Hey that is cool. It was (EVAP Control System Canister Vent Solenoid Circuit Malfunction). The problem was a bad wire that came off the vent solenoid. If you go to the back of the truck and look under the bed between the frame right if front is the spare tire you should see the EVAP canister. On top was the vent solenoid for the canister. If you check the wires that go from the solenoid to the wire harness one of them may be cracked, or split. Yes it was that easy but, I did find that after I got a new solenoid and canister... good luck...
 
The following users liked this post: