Chris (F350-6)

I am not pulling any trouble codes. When the trucks starts and runs normal the WTS light functions normal. I just touch some of the fuses on the panel and everything shuts down. When it won't start normally after moving fuses around I get a THEFT LIGHT code 16. One blink...pause...six blinks. I don't know that code. Have not found it yet but am search around for the definition. Mess with the fuses a little and all is normal and it starts fine. Just need to touch a fuse or two and everything goes haywire with a dash idiot light show and then dies. Looks like I need to remove the fuse panel torx screws and split the case to see what everything looks like in there. That's where I am at this point. Have a Stancore relay to install but not sure if it will work with the shunt I have on the original solenoid. THANK FOR YOUR ASSIST.

Ernie.