View Single Post
  #13  
Old 04-13-2008, 07:59 PM
MrRogers's Avatar
MrRogers
MrRogers is offline
Senior User
Join Date: May 2007
Location: Olathe, KS
Posts: 224
Likes: 0
Received 1 Like on 1 Post
I have the exact same problem and it turns out I had moisture getting in the gap at the back of the hood. There's a seal that's supposed to be there that let water run in and all over the back of my engine including the ignition coil and a bunch of wiring harnesses. Check to make sure that's not happening.

Josh