View Single Post
  #6  
Old 04-10-2008, 02:56 PM
monsterbaby's Avatar
monsterbaby
monsterbaby is offline
Hotshot
Join Date: Dec 2003
Location: iowa
Posts: 18,423
Likes: 0
Received 6 Likes on 6 Posts
MT ET drag slicks with rims, and cut boggers

I have a set of Micky Thompson ET drag slicks 33x10.50x15w mounted on 15x12 centerline convo pro's with 5on 5.5 bolt pattern. have brand new drag tubes in them and screwed to rims. I mounted them on my ranger for a exhibition run with it, made about 10 test launches in front of the house then when I went to load it to take it to the track broke the starter so they have never made a full pass and never gone over about 20mph (about 60-80ft each launch) the tires are about $250 ea, tubes about 60 ea and the rims were about $250 ea, yes they are used so no I dont' expect high dollar but would like to see $550 for the pair. I really don't want to ship these.

pics of them on the truck



Also have a set of 18/39.5-15 Boggers, these have been cut for competition use. Tires were brand new before cutting never been on the pavement except to load on the trailer ran them a couple years. they are NOT mounted on rims. new $350 each would like to get $450 out of the pair and once again really don't want to ship them.

here is a pic of them on the truck




or here is a pic with them
https://www.ford-trucks.com/user_gal...=92340&width=0

and close up of them after cutting one to compare cut vs uncut
https://www.ford-trucks.com/user_gal...=91593&width=0