Thanks for chiming in guys.

I think I'm going to do a processor based on a 55 gallon drum and weld on a cone bottom. Theres a surplus store here and they have a bunch of these dome like shaped pieces of metal. I think that would work pretty good to make a "conish" bottom. I found the cone bottom's online but it's $75 with shipping, when i can go get the dome for under 10.

I checked out your gallery before fabman, I'll check it again and look it over. Theres a post on the forum here with a 55 gallon cone bottom drum, then 2 other drums to wash and dry the fuel, I like how it's set up and it's actually what I was thinking of originally.