>I have a 77 F-250 4X4 with
>a 400M and am going to
>swap to a 460. I
>have done this before in another
>truck and used L&L products fenderwell
>Headers and motor mounts. The
>problem is that the mounts are
>priced OK but the headers are
>about $500. They are a
>very good set of headers but
>a little spendy for this project.
> Does anyone here know of
>any other companies that make headers
>for this swap. They need
>to be fenderwell headers as I
>want the extra room inside of
>the frame. I thought that
>Hooker used to make a set
>but haven't been able to find
>any info on them. Thanks ahead
>of time for the info.


i'm just finishing putting together my 1977 f250
4wd with a 460 and i'm using hooker competition
headers. they still are about 500.00 though.
but check out www.autokrafters.com has them. they
have alot of stuff.