View Single Post
  #3  
Old 02-07-2008, 11:04 PM
LastSplash LastSplash is offline
Senior User
 
Join Date: Sep 2006
Location: North Pole, Alaska
Posts: 252
LastSplash is starting off with a positive reputation.
There should be a timing mark on the crank pulley that lines up with a mark on the block when the engine is at #1 cylinder TDC, plus there are timing marks on the cam sprockets. From past experience YOU CANNOT CHECK THAT THE TIMING MARKS ARE STILL LINED UP!!! it is easy to end up 1 tooth off.
Reply With Quote