Originally Posted by myexpo02
Thanks for the info.....I have never been a big fan of turning rotors....it just seems that when you take off metal....there is less metal to dissipate the heat created. But thanks again....I am still keeping an eye on mine for a while.
I only have 6500 miles on mine.
Yeah, of course new rotors are always best. They didn't take off much material and it's not different than getting new pads, in which case you should turn them as well. Read that article up a few posts. Good info on pad material transfer, etc. I made sure I broke them in right. I am a brake lead foot too, that has to change.