Originally Posted by Tom D
Thankyou for the reply. I plan to use a "flash chamber" per Fabman instructions and heat the BD or Glycerol to 100F prior to flashing it. The gear pump wil have approx 100PSI and a nozzle to spray (flash) .Any comments or suggestions you have will be GREATLY appreciated. Thanks again. Tom
I have been in contact with Delevan Corp to purchase a nozzle to flash my BD in the chamber. I have a 6"x24" steel chamber. Their catalog can be found @
www.Delavaninc.com/PDF/WDxNozzles.pdf Could you please take a look and see what you think? I don't know what kind of nozzle Fabman has. All I know is he has a 1/16" hole which would equate to .625. Their closest nozzle is .070" which would be 31.4 gal @ 100 PSIG. I don't know whether I need a brass or SS adapter.and what degree pattern would be best. Will the methanol react badly with the brass? Hopefully Fabman will notice this post and put in his 2 cents. I have been unable to contact him. Thanks a lot. Tom