Pulled my non working radio out to replace with a new one and the colors on the wires aren't what they should be? One bracket is broken (thus the non working part of it all), I figured I would just cut and connect the wires, ive done it plenty of times, right? Ive figured out the red is ground. confused allready

One bracket has these:
Yellow w/Blue stripe
Light Blue w/ Red
Green w/ Yellow
Orange w/ Black
Red (Ground)

The other bracket has these:
Orange w/Green
Black w/white
White w/ Green
Black w/white



Any help would be appreciated. I search the internet and repetedly find nothing.

Thanks