Originally Posted by e william
I posted the below ? in wiring forum as well....
Good progress made on wire harness...main pwr. lead to fuse box will hook to the "B" terminal on the regulator...can someone tell me what job the "alternator exciter wire" does ? I dont seem to have a home for it (I have a 12v gen. and external regulator).
Is it possible that this is the trigger for the starter, I have one wire label to starter that goes to the battery side of starter selinoid but need a return from start switch to the other side of selinoid.
All other systems wired and accounted for ...I think!
thanks,Ed
put it to a hot side of the switch when the key is in the run position,it will not charge if it don't get 12 volt's to it in the run position.