Originally Posted by darrin1999
are you still using that motorsports cam? if so its got enough duration it should be ok, but you may have to play with the timing a bit.
Hello darrin1999, No I will not be using that Ford Racing cam, its long gone-sold, I am looking at two camshafts by Doug Herbert, one is a Solid with 690/690 lift and 274/274 duration, the other is a Solid Roller with 700/710 lift and 264/274 duration, both cams RPM range is 3'500 to 7'500 but will come come to 3'000 to 7'000 as I am adding nearly 100 cubic inches. BP are releasing a new 100 octane fuel very soon down here so I will give it a try, Thanks Jamie.