>Esslinger Performance sells a high performance head for
>these engines. I don't remember if is SOHC or DOHC, though.

It's a SOHC, aluminum, really good ports, good
chamber design, flows lots of air at mid and high
lifts, you'll prbably need a custom ground cam...

>What I do remember, is that it is expensive. Somewhere
>around $3000.

Yeah, that sounds about right, for a head
with the valves and springs installed...
but no cam or followers...

> That's more than my entire vehicle is
>worth.....

I feel your pain...

I do have a line on a 4 valve twin cam
for a Pinto 2L, all it needs is a set of
valves, as the belt broke, Doh...

Steve & the Rockette
'63 F100
'68 F100
'72 Capri 2L
'73 Capri 2.6L V6
'73 MG B GT 2.6L V6(Ford)
'98 Contour SVT 2.5L V6 (Mods)
'01 ZX2 (No Mods yet)