>I have a Ford book on the 32-54's but it doesn't say exactly
>which carb they put on the 6's.
>
>The Stromberg's & Ford's(Chandler Groves)were used on V-8's
>
>As far as carb application goes for that year> I have
>tractor carb applications.
>
>
>Dennis
>
>F.T.E. Assistant Administrator
>
>http://www.clubfte.com/users/mil1ion/SigSanta.JPG
>[font color=red]
>"May The Spirit Of Christmas Be An Inspiration To You
>Throughout The Year"[/font]
>
>[link:www.ford-trucks.com/guidelines.html|Club FTE]
>
>[link: motorhaven.autoanything.com|How YOU Can Support This Site]
>
>[link:www.clubfte.com/users/mil1ion/Mil1ion.html|My
>Website,"North Of The 49th"]


i have several flathead V8's (even one in an 8N tractor) in my collection of ford treasures using the ford (c-g) and the stromberg two barrels; even one running on l.p. gas. i couldn't use one of that type carb on the 6 cyl. unless an adapter plate was made for the intake mount. also, i'm afraid it might run too rich being a two barrel. hooking up the throttle linkage would not be a problem. i'm not sure about the flow rates of these carbs-any thoughts?
in your tractor carb apps, do you show a one barrel downdraft for these years or just the normal one barrel updraft (marvel-schebler?) for the 4 cylinder tractor engine? thanks, will.