View Single Post
  #4  
Old 12-01-2002, 10:18 AM
granitehauler's Avatar
granitehauler
granitehauler is offline
Freshman User
Join Date: Jul 2002
Location: santa cruz usa
Posts: 36
Likes: 0
Received 0 Likes on 0 Posts
carb rebuld kit for f-3 with flathead v8

Thank you both for the replies. I will go ahead and order the standard rebuild kit and give it a shot.

The fuel filter will be essential. The truck currently runs off a recycled one gallon lacquer thinner can that is wired to the firewall and sits on top of the oil filter. The previous owner epoxied a tube into the bottom of it to gravity feed the carb. Given this I can only imagine the condition of the fuel tank and line must be pretty atrocious.

Thanks again for the help
Karl