>
>What I want to know more baout the 351-4v heads on a 400.
>Was tha a 400 intake or a 351 intake with spacers?
>How is the port match up?
>

You need adapter spacers and a 351C-4V intake. I used Weiand spacers and an Edelbrock Performer intake. The spacers match a 2V port, but I tapered them to match the 4V port and the Performer intake.

Due to the position of the intake, the Ford distributor will not fit. A Mallory Unilite will, I am not sure about any others.

Dan Lee
'53 F100
400C-4V