[QUOTE=Gun-Driver]
Originally Posted by You DO NOT want to use pump mixing with Magnesol. The "sheer" effect of a pump will "grind" the Magnesol so fine it is difficult to filter out. QUOTE
Fabman,
Is it ok to pump it after the mixing is complete. I was planning on pumping it from the mixing tank thru the 5 micron filter into another holding tank, than pump thru a 1 micron into the final storage tank. But if it will shear down to a size that may not filter out how else can I transfer it through the filters.
I use a small pump to move it through the filters, no problems yet. My new processor will use gravity to move it through the filters. I'm trying to use as much "free' gravity as possible
