Hello all,
I have a 89 ford range 2.3 liter 4 cyl. twin coil packs. Replaced the timing belt after a head refurbish. I lined the pointer on the camshaft with the marks on the timing belt cover and I lined the crankshaft groove with the TDC mark on the timing cover, as stated in the "Chilton" book. The spec. sticker under the hood states that ignition timing is 10 degrees before BTDC. I am wondering which setting is correct. The coil pack on the exhaust manifold side is firing but the intake side is not. I swapped the coil packs and they are both good. Any suggestions appreciated.


Thanks
Btooling