#3  
Old 12-01-2006, 02:13 AM
Old Rust Bucket's Avatar
Old Rust Bucket
Old Rust Bucket is offline
Elder User
Join Date: Aug 2006
Location: Hewitt, Minnesota
Posts: 813
Likes: 0
Received 0 Likes on 0 Posts
Take this engine put it in a 1/2 ton and put a 5 speed in it.
Not much power but look at the torque:

PowerTech 3029T

Rated Power
Intermittent 79 hp (59 kW) @ 2500 rpm
Continuous 71 hp (53 kW) @ 2500 rpm
Peak Torque
Intermittent 200 lb-ft (271 N.m) @ 1800 rpm


GENERAL DATA
Bore and Stroke - in. (mm) 4.19 x 4.33 (106 x 110)
Compression Ratio 17.2:1
Aspiration Turbocharged
Length - in.(mm) 28.2 (716)
Width - in.(mm) 20.8 (528)
Height - in.(mm) 36.5 (928)

Just occured to me that alot of torque for a "little" 3 cylinder.
 

Last edited by Old Rust Bucket; 12-01-2006 at 02:18 AM.