Thread: 400hp 351w
View Single Post
  #12  
Old 03-08-2002, 01:16 AM
sauerf100s's Avatar
sauerf100s
sauerf100s is offline
Tuned
Join Date: Mar 2002
Location: Ft. Walton Bch 32547
Posts: 405
Likes: 0
Received 1 Like on 1 Post
400hp 351w

[updated:LAST EDITED ON 08-Mar-02 AT 02:17 AM (EST)]Ford Racing has a 392 stroker motor that puts out 461 hp and 454 lbs-ft of torque. Just for the fun of it, replace the GT-40X heads with a set of AFR heads milled to a 54cc chamber, Victor Jr. intake, and Speed Demon Carb. Try 537 hp at 5900 rpm's and 505 lbs.-ft of torque at 4900 rpm's. Box stock heads except for the mill job. That's a 351 block bored .030" over. Custom crank with 3.850-inch stroke, along with stock-length 351-W rods, using .030 over 302 pistons. Actually it meaures 393 cubic inches. I think that proves the carb is not yet dead. Pretty good for having no power adder and a 750 cfm carb. Oh yeah. The cam is a Comp Cams XE282HR. That's the most important ingredient.