Originally Posted by ieee_raider
Yes, you need a c-clamp. A 3" wasn't big enough so I had to go buy a 6" and it worked fine.
If you plan on turning your rotors, just know that on the front wheels of a 2WD, the rotors don't come off unless you take off the whole hub and all.
This is a 4x4. Thanks for the reply on the C-clamp. I don't need to turn my rotors. Only 21K on the truck and got new front rotors (via a TSB) at 17K so they're good.
Finally going to get rid of those damn dust machines!
CMOS