Originally Posted by fabmandelux
The last run I made removed about 95 percent of the glycerol within 15 min, and when it is installed with the rest of the new equipment it should let me make 100 gal/ hour on a continious basis.
Fab have you considered running your product back thru the hydro-cyclone to see if it will remove more glycerol
Originally Posted by kennedyford
best and cheapest way to throw the heavy molecules of the glycerin and large particles to the outside and pull clean out of the middle.
I believe that glycerol is considerable lighter than BD: 3 carbon chain vs avg 14 carbons for BD