Originally Posted by LEckart
Most GM mid-size and even the Corvette use a 5 on 4 3/4" bolt pattern. The Ch++y 1/2T trucks, at least the older ones, used the 5 on 5" pattern. You usually can't swap GM and Ford wheels. On my 56 I use the small Ford pattern, 5 on 4 1/2".
How did you do that? I saw a 56 with the same wheels as my explorer has. I know they are 5 on 4.5, so I wondered how they fit.
I need to go home tomorrow and measure the wheels on the monte.