Originally Posted by holland501
I may not have explained myself clearly in my original post. I am looking for a product that you would coat the battery post and the inside surface of the cable clamp that would prevent corrosion of those mating surfaces. I would also like it to be conductive so that it could fill in any tiny gaps or voids between those mating surfaces so that there would be vertualy 100% contact. I hope this clears up any confusion. Thanks.
I understood what you wanted. I was trying to read between the lines and guess at the problem you where having, and a solution that has worked for me. I will be surprised if you find anything that will do what you are looking for. Good luck.