I honestly haven't thought too much about it and don't have any idea what it would be worth. I intended on rebuilding it for my 76 f150 but lack of a place to work and lack of money kept me from doing anythng with it.

At least one cylinder needs to be bored. I haven't checked for taper or anything on them just know one cylinder has some pits in it.

I have new pistons, rods and rings but don't know if the pistoncs and rings will do you much good if all cylinders need bored. Also have most of the gaskets, rod bearings, main bearings, new timing set up.

The crank and cam need at least polished, if not ground.

The heads are practically new. One of them has about 500 miles on a rebuild and the other one has is newly rebuilt.

Anyway, after all of this, if you are interested or have any more questions. Let me know what it it worth to you and maybe we can work something out.