Originally Posted by kb1aah
I have the Code Alarm model # CA530 Remote start unit that was installed by the dealer. In the manual from code alarm it is suppose to have a 5 minute cool down timer that is activated by keeping the brake pedal pressed for an additional 5 seconds after placing the shifetr in park. It doesn't work. I asked the dealer and they said that they were told by the local installer that they had problems with this function and no longer supported it. I emailed code alarm and they said it should work fine. Any thoughts/ideas? Would be nice to have. I didn't see anything pertaining to this in the PDF info above.
the above refers to the Ford remote systems only. Your alarm is aftermarket.
You need to get your hand on an install and set-up manual for your Code-Alarm. you usually have to program options in an alarm like that. you may have to find a local Code-Alarm installing dealer to get the info for you.