I just checked the tps for voltage and it has the following- top wire (i think brown with a red stripe?) 0.020 volts middle wire (tan and white) 0.805 volts and 4.07 volts @ wot and bottom wire (black and white) 5 volts. are these correct or is my tps buggered? any help greatly appreciated, i don't have a hanes manual yet. also would a faulty tps cause the E4OD to shift erratic and kick in and out of od? also also would a faulty tps cause the tach to be innacurate? thanks in advance.

ps its a 92 7.3l E4OD 4x4.