Thread: loss of power
View Single Post
  #2  
Old 08-31-2004, 09:34 PM
Dealford's Avatar
Dealford
Dealford is offline
Cargo Master
Join Date: Aug 2003
Location: Belleville, Ontario
Posts: 3,237
Received 1 Like on 1 Post
Have you checked for stored codes?
Here's a link to the Ranger board's Technical Information sticky:
https://www.ford-trucks.com/forums/s...d.php?t=107538
The 94 is EEC-IV. There's enough info there to bring you right up to speed with the system. You'll need a multimeter (VOM) to pull codes.
There's some very expert guys on the Ranger board that would be happy to help you through this problem.
AL.
 
Reply Like