Well as the thread title says I need a little help with some serpentine belt routing. I had to put a new alternator in my 99 ZX2 and have completely lost the routing for the belt. Does anyone have a diagram or know where I can find one on the web. I thought there is usually one under the hood somewhere but there isn't in this case. The owners manual shows nothing and the Haynes manual has been pretty much wothless through out this task. I wish I had a chiltons for this thing too. Also, I forgot to unhook the battery before I started and when I was disconnecting the alternator wire I think I popped the main 100 amp fuse under the hood. Anyone happen to know how these fuses come out? Manual says there is a screw holding the main one in but I figure I would ask while I am at it. I have never had to deal with these types of fuses before so I don't want to break anything. Thanks!